Published
A logo lockup is a fixed arrangement of your symbol, name and any descriptor, saved as one file so the spacing can never be re-typed by hand. Most brands need three of them — horizontal, stacked and compact — plus two reductions, because no single arrangement survives both a signboard and a 16-pixel browser tab.
How this was checked. The size numbers below are quoted from two brand guides that publish theirs openly: MIT’s lock-up page, which sets a ladder of two size bands across three files, and Google’s Android partner marketing guidance — its logo lock-ups page and its wordmark page — which sets a floor and a swap threshold instead. Both guides were read on 30 August 2026. Every piece of arithmetic — circle crops, header heights, artboard counts — is ours and is written out so you can recheck it against your own mark.
A lockup is a decision about spacing, saved as a file
Three things usually go into one: the logomark, the symbol or monogram; the logotype, your name set in a chosen typeface; and a descriptor, the line that says what you do or which unit of a larger organisation this is. A tagline sometimes joins them. A lockup is the decision about how those sit relative to each other, frozen so that nobody has to make it twice.
That is the whole idea, and it is worth stating negatively, because the term gets used loosely:
- A lockup is not the logo. The logo is the mark. The lockup is one approved arrangement of it.
- A lockup is not a redraw. Between a horizontal and a stacked version nothing new is drawn: the file is rearranged and re-proportioned — the artwork is the same, the relationships are not.
- A lockup is not a template. If the name is an editable text field that anyone can retype, you have a layout. A lockup is outlined artwork with no live text to break.
The word comes from letterpress, where the loose components of a page were locked into a frame called the chase before it could go on press. Nothing in the frame could shift. That is still the promise: you scale the file, you never re-space it.

Three lockups and two reductions: the set, row by row
A working set is five files. Three of them are lockups in the strict sense — two or more elements locked together. The other two are reductions, and their entire job is to stop somebody using a lockup where a lockup cannot fit.
| File | What changes | Where it goes | It stops working when |
|---|---|---|---|
| Primary horizontal lockup | Symbol left, name right, descriptor under the name | Website header on desktop, letterhead, email signature, wide signage | The container is narrower than roughly four times the lockup’s height |
| Secondary stacked lockup | Symbol above a centred name, descriptor under it | Narrow columns, square ad units, merchandise, event backdrops | The name’s cap height falls below the legible floor before the symbol does |
| Compact one-line lockup | Symbol and name only, descriptor and tagline dropped | App bars, UI headers, footers, small print, sponsor rows | The name itself drops under the published wordmark floor |
| Submark (reduction) | Symbol or monogram alone, no name | Social avatars, stamps, packaging corners, watermarks | Interior detail closes up at the size in question |
| Favicon fragment (reduction) | The single simplest element that is still recognisable | Browser tabs, app icons, map pins, embroidery on small items | Nowhere — this is the floor of the set |
Each of the five ships in three colour treatments: full colour, one-colour black, and reversed white for dark backgrounds. That is fifteen artboards, before file formats multiply them again. The count matters, because “send me the logo” is a request for one of fifteen things and the person asking almost never knows which.
The two reductions are the part small brands skip, and skipping them is what forces the damage. Nobody sets out to squash a horizontal lockup into a circular avatar. They do it because at that moment the only file on the desktop is the horizontal lockup.
Minimum size is a property of each lockup, not of the logo
The two brand guides that rank for this term answer the size question in opposite ways, and both answers are useful.
MIT publishes a ladder. Its three-line lock-up and its one-line lock-up are both marked “Use above .4375” tall” in print and “Use above 50 px tall” on screen. Below that, a third file takes over: the micro lock-up, a one-line variation marked for .1875” to .4375” in print and 20 to 50 px on screen. In millimetres that ladder is roughly 11.1 mm and above for the full lock-ups, and 4.8 to 11.1 mm for the micro version.
Android’s partner guidance publishes a floor and a swap. Its rule for the wordmark is “Do not make the wordmark smaller than 16px height or 0.15 in (0.4cm)”, and for the group it adds a swap: “For lockups smaller than 40px height or 0.3 in (0.7cm), use the flat version of the Android icon’s head.”
Two different institutions, two different mechanisms, one shared premise: the threshold belongs to the arrangement, not to the brand. A single “minimum size of our logo” cannot be correct for a three-line lock-up and a bare symbol at the same time, because they run out of legibility at different points and for different reasons — the lockup loses its descriptor line, the symbol loses its interior detail.
So write a minimum height on every row of your own set, in pixels and millimetres, and put that number in the file name. A file called brand-primary-horizontal-fullcolour-min50px-11mm.svg gets used correctly by people who never read the guidelines, which is most people.

Clear space works when it is baked into the file
Clear space, also called the exclusion zone, is the margin nothing else may enter. The rule itself is simple. What makes it survive contact with real work is how it is expressed and where it lives.
Express it in the mark’s own units. A rule written as “8 mm on every side” is correct at one size and wrong at every other. A rule written as “the height of the symbol”, “the width of the letter o” or “half the cap height of the name” scales with the artwork automatically, so the same sentence holds on a business card and on a truck.
Then bake it into the export. Give each artboard the exclusion zone inside its own canvas, so a PNG dropped into a slide carries its own breathing room and nobody has to apply the rule by hand. This has one practical consequence worth writing down: the padding is now part of the image, so a developer must not add margin on top of it, and a designer must not trim what looks like empty space. Undocumented baked padding is the usual reason a header logo sits visibly off-centre while every CSS value in the file looks correct.
The lockup grid: three relationships that get frozen
Searches for logo lockup grid are looking for the construction drawing, and what a grid actually records is three relationships. Get them written down and any designer can rebuild the lockup at any size without guessing.
- The gap. How far the name sits from the symbol, expressed as a fraction of the symbol — half its width, one stem width of the wordmark, whatever is stable in your artwork. Never in millimetres, for the reason above.
- The alignment. What lines up with what. Cap height to the top of the symbol, baseline to its optical centre, or the whole group centred on a shared axis. Bounding-box centring is the usual mistake: a circular symbol next to flat-sided capitals reads small when the boxes are aligned and correct when the circle overshoots the cap line slightly at both ends, which is why optical centring exists at all. The related fault — a symbol that sits visibly low — comes from aligning to a text bounding box that includes descenders, so part of the box is empty air below the baseline.
- The relative scale. The name’s cap height as a proportion of the symbol height. This is the number that decides whether the lockup reads as a mark with a name attached or as a name with a decoration attached.
Once those three are frozen, one rule follows and it is the rule that gets broken: scaling is uniform or it is nothing. Enlarging the wordmark alone to fill a box changes all three relationships at once, and the result is a file that is no longer the same lockup, circulating under the same name.
A stacked version is a genuine redraw of relationships two and three, not a rotation of the horizontal one. Centred names usually need slightly more cap height relative to the symbol than left-aligned ones do, because the eye has no vertical edge to follow.
Header, avatar, signboard: which file each surface can take
This is where the set earns its keep. Three surfaces, three answers, and the arithmetic is checkable.
A website header takes the compact lockup more often than the primary. A 64-pixel header row with 20 pixels of padding above and below leaves 24 pixels of drawing. On MIT’s published ladder, 24 pixels is micro-lockup territory — the band from 20 to 50 pixels — while both the full lock-ups are marked for use above 50 pixels. The primary lockup that looks right in a wide desktop mockup is often already below its own floor by the time the header is built.
A circular avatar takes the submark, and the arithmetic is unforgiving. Platforms crop a square upload to a circle. The inscribed circle keeps π/4 of the square’s area, about 78.5%, so 21.5% is removed — and all of it comes from the corners and edges, exactly where a horizontal lockup keeps its ends. Fit a 4:1 horizontal lockup inside a circle of diameter D and its height can be at most D ÷ √17, which is about 0.24D. On a 48-pixel avatar that is 11.6 pixels for the whole lockup: symbol, gap and name together — and that is at 4:1. The primary drawn in the anatomy figure above runs 4.66:1, and a wider lockup lowers the number further: at 4.66:1 the same 48-pixel avatar leaves 10.1 pixels. Android’s published floor for a wordmark on its own is 16 pixels. The primary lockup fails the test before the name is even measured. A submark drawn to 80% of the same circle gets 38 pixels of usable height.
A signboard reverses the constraint. Here nothing is too small; the risk is the opposite, that a file scaled up to two metres turns out to be a screenshot. Signage takes the primary or stacked lockup, in vector, with the descriptor legible — which is also the one surface where the detail you removed for the favicon comes back and has to still be there in the master artwork.
![]()
Partner and unit lockups add a name without inventing a mark
The moment a second name has to appear beside yours — a partner, a sponsor, a department, a campus — someone is tempted to design a new logo for the occasion. The established answer is a lockup instead, governed by whoever owns the dominant brand.
Android’s partner guidance ties the spacing to a letter. Its clear-space rule reads: “For the wordmark, this space is equal to the ‘o’ size.” One sentence, no ruler, correct at every scale, and it gives partners something they cannot get wrong.
Johns Hopkins runs named families. Its guidelines define unit lock-ups for departments, centres, labs and institutes, athletic lock-ups for teams, and location lock-ups, built for permanent exterior signage at campuses and separately named spaces. Unit lock-ups exist in two arrangements — the logo stacked on top of the unit name, and the logo locked to the left of it — which is the same horizontal-and-stacked pair as any brand’s core set, applied to a name that changes. The governance is blunt: “Do not create your own lock-up.” Names in the field cannot contain acronyms, all caps, special characters, contact information or taglines, and the proportions of location lock-ups must not be altered.
Incidentally, the three brand guides quoted here also settle the spelling question: MIT and Johns Hopkins write lock-up, Google’s Android hub writes lockup, and both are in current published use. Pick one and keep it in your file names, because a set that mixes spellings is a set nobody can search.
The transferable rule for a small brand is to decide the co-branding pattern once, before the first partnership makes it urgent: whether a second name sits beside your mark or under it, what separates them, what may never enter the name field, and who is allowed to produce the file. The requirement that the mark appear at all in a given piece of work comes from a different document: the mandatories line of a creative brief, which is where “the logo must be in every execution” is written down and signed off.
Six checks that tell you a lockup set is finished
Run these against a set you have already been handed. Each one is a yes or no.
- Every row has a written minimum height, in pixels and millimetres, and the number appears in the file name rather than only in a PDF.
- The stacked version was re-proportioned, not squashed. Compare the name’s cap height against the symbol height in both arrangements. If the ratio is identical, the file was scaled from the horizontal one and the centred name will read small.
- Clear space is expressed in the mark’s own units, and the artboards carry it as padding, with a note saying they do.
- The submark is a decision, not a crop. A symbol lifted out of the primary lockup’s artboard usually arrives with the wrong optical weight and the horizontal lockup’s padding still attached.
- One-colour black and reversed white exist for every row and were drawn, not auto-converted. Automatic conversion is what fills the counters of a monogram and closes the gap the lockup was built around.
- File names encode variant, colour treatment and format —
stacked,reversed,svg— so that choosing a file in two years does not require opening five of them to compare.
A set that fails checks two, four or five is not incomplete, it is wrong, and the difference matters: missing files can be added later from the same master artwork, but a squashed stacked version and a cropped submark are already in circulation on somebody’s packaging.
What one-lockup brands end up doing instead
None of the failures below is a design failure. Each is what happens when a file is missing at the moment somebody needs it, and the substitute is made in thirty seconds by whoever has the deadline.
- The horizontal lockup uploaded as an avatar, then cropped by the platform into a symbol with two letters of the name still attached to it.
- The name stretched, not scaled, to fill a box that was the wrong shape.
- A screenshot of the logo pasted onto a dark slide inside a white rectangle, because no reversed version existed.
- Three decks with three different gaps between symbol and name, none of them wrong on its own, all of them wrong together.
- A conference organiser rebuilding your lockup from your website because the file you sent was 900 pixels wide and the banner was two metres.
Each of those is cheaper to prevent than to unwind, and the prevention is a list, not a talent: five files, three colour treatments, a written floor per row, and a clear-space rule stated in your own units. That is the deliverable our branding work hands over, and it is what to ask for whether or not we are the ones doing it.
Three neighbouring questions are worth separating from this one, because they get asked in the same conversation and answered by different logic. Which type of mark you own — wordmark, lettermark, emblem, combination mark — is chosen once, before any lockup exists. What a logo costs, and what a fuller set of variations adds to that number, is a scoping question. And how far a mark can change before it stops being the same mark is a redesign question with a legal edge to it. This guide assumes the mark is settled and deals only with how many arrangements of it you ship, and at what size each one stops working.
10 / Reader questions
Frequently asked questions
01What is a lockup in a logo?
A lockup is a fixed arrangement of your logo's parts — the symbol, the name set in type, and any descriptor or tagline — saved as one file so the spacing between them is never rebuilt by hand. You scale a lockup as a single object. You never re-space it.
02What is the difference between a lockup and a logo?
The logo is the mark itself; a lockup is one approved arrangement of that mark with your name and descriptor. No artwork is redrawn between lockups; the gap, alignment and relative scale are re-set. A brand has one logo and usually several lockups, because no single arrangement fits both a wide header and a square avatar.
03What does lock up mean in graphic design?
To lock up means to fix two or more elements in a permanent spatial relationship so they move, scale and export as one object. The phrase is inherited from letterpress, where the loose components of a page were locked into a frame called the chase before anything could be printed.
04Can you give me an example of a logo lockup?
MIT publishes three files but only two size bands: the three-line and one-line lock-ups share one threshold, and the micro lock-up takes over below it. Google's Android partner guidance publishes a horizontal lockup and a vertical lockup of the same wordmark and icon. Both sets are the same mark, arranged differently.
05What is a title lockup?
A title lockup is the same device applied to a title rather than a brand: a film, show or campaign name in its own type treatment, locked to whatever credits, dates or presenting-sponsor lines travel with it. It ships as one file for exactly the reason a logo lockup does.
06Is it spelled lockup, lock-up or lock up?
Two spellings of the noun are in current published use, and both are correct: MIT and Johns Hopkins write lock-up, Google's Android partner guidance writes lockup. Lock up as two words is the verb. Pick one spelling for your own file names and documentation, because inconsistency makes the set hard to search.
07How many logo lockups do I need?
Three lockups and two reductions covers almost every small brand: a horizontal primary, a stacked secondary and a compact one-line version, plus a submark and a favicon-grade fragment. Each of the five ships in full colour, one-colour black and reversed white, which is fifteen artboards before file formats multiply them.